31 March 2013
This mount fits essentially all 32-65" TVs sold today including any TV with a hole pattern from 100x100 to 700x400mm. From the initial APTMM2B design in 1999 until today, this mount has seen continuous improvement to keep pace with the state-of-the-art 1080P 3D TVs available today. The initial design which extended 3.5" from the wall has been reduced to 1.3" while still achieving 15 degrees of tilt to improve your viewing angle and reduce glare. To help our environment, our latest design achieves the same 165lbs of holding capacity with less than 6lbs of steel, which we refer to as the Stronger (Dual Hook) with Less Metal GREEN Design. US homes typically have either 16" or 24" studs. The APTMM2B is 27" wide allowing for up to 3" of side-to side adjustment even on 24" studs. Because of this, you may be able to see the APTMM2B mount behind smaller TVs and you may instead want to consider the Cheetah APTMSB for smaller TVs. When wall mounting a TV, often the 6' cables that come with many component devices such as DVD players, will not quite reach. So we include a full 10' HDMI cable adhering to the latest 1.4 HDMI standard and capable of carrying a 1080P 3D signal including Ethernet and Audio Return. This mount also ships with a full set of hardware to both mount your TV to the wall (either wood stud or cement) and to your TV (including 4, 5, 6 and 8mm screw sets). Lastly, your mount ships with a bubble level on the mount and a separate 6" 3-axis magnetic bubble level and approximately 3mm of rotation adjustment on the studs screw slots to help ensure that you achieve a level and enjoyable display. We have done our best to ensure that you will enjoy your mount, but should you be dissatisfied with ANYTHING in your mount purchase, we welcome your feedback and the opportunity to assist you. Please never hesitate to contact us and let us show you what we mean by a true lifetime 100% guarantee.